CNC Upgrade ani Precision Improvement Solution ka ɲɛsin Honing minɛnw ma minnu bɛ yen

Honing Machine Retrofit Baarakɛcogo ɲɛfɔli

Fɛn dilanyɔrɔ caman na, fɛn dilanni masinw bɛ baara kɛ kabini san caman, wa u bɛ ka taa a fɛ ka fɛn dilanni baara nafamaw kɛ.

Tuma caman na, o masinw bɛ kɛ ka ninnu kɛ:

• Silindri jilama dilanni
• Motɛri silinda masinw dilanni
• Aerospace yɔrɔw baarakɛcogo
• Tubabu tigitigi dilanni
• Industriw ka minɛn girinmanw dilanni

Nka, baara kɛlen kɔfɛ waati jan-la, laadala honing machines bɛ se ka gɛlɛyaw sɔrɔ:

• Kuranko ɲɛnabɔcogo kɔrɔlenw
• Paramɛtiriw ladilanni gɛlɛn
• Masina baarakɛcogo dɔgɔyali
• Jigiyaba bɛ baarakɛla ŋanaw kan
• Otomatiki seko danma
• Pièces de rechange gɛlɛnw cili
• Dɔgɔyara sɛnɛfɛnw dilanni nafa la

Ka honing machine kuuru bɛɛ falen a nɔ na, ​​o tɛ sugandili ye min nafa ka bon kosɛbɛ tuma bɛɛ.

Dilanbaga caman fɛ, minɛn minnu bɛ yen, olu sɛgɛsɛgɛli bɛ se ka kɛ fura ɲuman ye:

• Aw bɛ masin baara waati janya
• Aw bɛ masinw kɛcogo ɲɛ ka taa a fɛ
• Dɔ fara sɛnɛfɛnw dilanni nafa kan
• Aw bɛ dɔ bɔ minɛnw musaka la
• Yɛlɛma donna fɛn dilanni seko la

Liruite bɛ Honing Machine Retrofit Solutions di ka da CNC honing machine dilanni dɔnniya kan san caman kɔnɔ.

An bɛ minɛnw cogoyaw sɛgɛsɛgɛ minnu bɛ yen ani ka sigida jɔnjɔnw labɛn kokura, i n’a fɔ:

• CNC ka kunnafoni-falen-falen sira
• Servo drive sitɛmu
• Balofɛnw falenfalencogo
• Sistɛmu min bɛ taa ni spindle drive ye
• Sistɛmu min bɛ ɲɔgɔn falen-falen
• Nɛnɛ ni filɛri kɛcogo
• Honing baarakɛminɛnw sigicogo

Laɲini ye ka laadala honing minɛnw sɛmɛntiya ka kɛ masinw dilanni siratigɛ la min sabatilen don, min bɛ baara kɛ ka ɲɛ ani min bɛ se ka kɔlɔsi.

Liruite ka baara ɲɛsinnen bɛ CNC horizontal honing machines ma ji silinda, dingɛ jugumanw ani precision kɔnɔna-dingɛ yɔrɔw la. An ka retrofit solutions bɛ dabɔ ni fɛɛrɛ kelenw ye minnu bɛ kɛ an ka CNC honing minɛn kura kɔnɔ.

Mun na fɛn dilannikɛlaw mago bɛ Honing Machine Retrofit la?

1. Kɔrɔya kunbɛncogo

Honing machine kɔrɔ caman bɛ baara kɛ ni ninnu ye:

• Relais ka kunnafoni
• Laadalata kuran kabiniw
• Bololabaarakɛlaw ka ladilanni siraw

Gɛlɛyaw:

• Ladonni gɛlɛn
• Baarakɛcogo danmadɔw
• Sɛnɛfɛnw dilanni kunnafoniw dɛsɛ
• Faratiba bɛ jɔli waati la

Retrofit kɔfɛ, Liruite bɛ control system sɛmɛntiya ni:

• CNC ka kunnafoni-falen-falen-plateforme
• Ekran min bɛ se ka maga a la
• Paramètre numérique (paramètre numérique) ɲɛnabɔli
• Hakilila sɛgɛsɛgɛli baarakɛcogo

Sistɛmu min sɛgɛsɛgɛra, o b’a to baarakɛlaw bɛ se ka ninnu kɔlɔsi:

• Honing kunkolo teliya
• Teliya min bɛ ɲɔgɔn falen-falen
• AVC jɔyɔrɔ
• Balo hakɛ
• Masina baara waati

Liruite CNC honing machines bɛ baara kɛ ni honing control systems kɛrɛnkɛrɛnnenw ye ni 15-inch kulɛri touchscreen interface ye, waati yɛrɛ la baarakɛcogo kɔlɔsili ani parameter management baarakɛcogo.

2. Masinaw ka tiɲɛni min bɛ dɔgɔya

San caman baara kɔfɛ, masinw sɛgɛn bɛ se ka kɛ sababu ye ka:

• Spindle alignment deviation (sɔgɔsɔgɔninjɛ alignment deviation).
• Feed system kɔkanna-ko
• AVC jɔyɔrɔfalen filiw
• Bore jogo jiginni

Taamaʃyɛn minnu bɛ sɔrɔ tuma caman na:

• Ka dɔ fara banbaliya hakɛ kan
• Jogoɲumanya danfaralen baarakɛlaw ni ɲɔgɔn cɛ
• Surface roughness min tɛ sabati

Retrofit bɛ se ka ɲɛtaa kɛ:

• Dumuni kɛcogo tigitigi
• AVC tiɲɛni
• Taabolo segin-segincogo

Liruite CNC honing fɛɛrɛ bɛ dɛmɛ:

• H6-H8 masinw ka tiɲɛni
• Lamini kɔlɔsili ye 0,02mm–0,04mm ye

Surface roughness Ra0.2–Ra0.4μm ka kɛɲɛ ni baarakɛminɛnw ni baarakɛcogo cogoyaw ye.

3. Pièces de rechange gɛlɛnw sɔrɔli

Masina kɔrɔw bɛ se ka baara kɛ ni ninnu ye:

• Kuran yɔrɔw minnu dabilalen don
• Kontrɔla kɔrɔlenw
• Yɔrɔ minnu kɛra ka kɛɲɛ ni mɔgɔw sago ye, olu tɛ sɔrɔ tugun

O bɛ kɛ sababu ye ka:

• Ladonni waati jan
• Dilan musaka ka bon
• Sɛnɛfɛnw dilanni tigɛcogo

Liruite retrofit bɛ fɛn kɔrɔw bila u nɔ na ni:

• Bi servo sitɛmuw
• Kuranko yɔrɔ kuraw
• Modules de contrôle standardisées (Kɔrɔsili moduluw).

4. Ka dɔ fara fɛn dilanni wajibiyalenw kan

Bi fɛn dilannikɛlaw b’a ɲini:

• Tiɲɛni min ka bon kosɛbɛ
• Sikili waati teliya
• Nizɛri ɲɛnabɔli
• Baarakɛla-terikɛ baarakɛcogo

Masina min tun bɛnnen don a san 10 ye nin ye, n’a sɔrɔ a tɛ se ka sisan sariyaw dafa.

Retrofit b’a to kiliyanw bɛ se ka fɛn dilanni seko sɛmɛntiya k’a sɔrɔ u ma minɛn kura san pewu.

Liruite Affichage Masini Retrofit Scope

Liruite bɛ retrofit baara kɛ ka kɛɲɛ ni masin cogoya ye.

Porozɛ min bɛ kɛ ka segin-ka-bɔnye kɛ, o bɛ se ka kɛ ninnu ye:

1. CNC Kunnafoni-falen-falen-minɛnw sɛgɛsɛgɛli

Yɛrɛyɛrɛ:

• Relais ka kunnafoni
• PLC nɔgɔman
• Bololabaara kɛcogo

Ka fisaya:

• CNC sitɛmu de honing kɛrɛnkɛrɛnnen
• Écran touché HMI (Ekran min bɛ se ka maga
• Paramɛtiriw marali
• Otomatiki baarakɛcogo

Baara minnu bɛ Kɛ:

Taabolo Paramɛtiriw ɲɛnabɔli

Baarakɛlaw bɛ se ka ninnu mara:

• Baarakɛminɛnw modɛli
• Bore diamètre (Bore diamètre) ye
• AVC paramètres (AVC paramètres) ye
• Balo paramɛtiriw

O bɛ dɔ bɔ mɔgɔ kelen-kelen bɛɛ ka ko kɛlenw na.

Tiɲɛ-Waati kɔlɔsili

Sisεmεti b’a jira ko:

• Spindle teliya
• Torque min bɛ kɛ ni broche ye
• Balo jɔyɔrɔ
• Jiginni min bɛ ɲɔgɔn falen-falen
• Baarakɛcogo cogoya

Hakilila kunnafoniw bɛ se ka jira k’u ɲɛsin interface (interface) ma.

2. Servo Feed System Retrofit (Baarakɛcogo kura).

Laadalata honing machines ka teli ka baara kɛ ni ninnu ye:

• Masinaw ka yiriwali
• Jilafɛnw balocogo
• Bololabaarakɛlaw ka musakaw

Gɛlɛyaw:

• Bonya kɔlɔsili min tɛ bɛn
• Labɛnni gɛlɛn
• Operatɛri ka dannaya

Liruite bɛ balo-sɛnɛcogo sɛmɛntiya ni:

• Servo motɛri
• Harmoniki dɔgɔyalan
• Fɛɛrɛ min bɛ kɛ ka mɔgɔw bila sira tigitigi

Kabakurun musakabɔcogo otomatiki bɛ ninnu di:

Balo balocogo: 0,001mm

Nafaw:

• Bore diamètre sabatilen
• Dɔgɔyara ladilanni waati la
• Batch consistency ka fisa

3. Spindle Drive (Spindle Drive) ka kɔsegin

Spindle system bɛ nɔ bila:

• Tigɛ sabatili
• Surface quality (yɔrɔ) cogoya
• Honing baarakɛcogo ɲuman

Retrofit ye ​​ninnu ye:

Yɛlɛma donna o nɔ na:

• Motɛri kɔrɔ
• Teliya ɲɛnabɔbaga
• Transmission yɔrɔw

Yɛlɛma donna ka taa:

• Servo motɛri bolicogo
• Teliya kɔlɔsili nizɛrikan na
• Torque bɔli sabatilen

Liruite ka labɛncogo danma:

4. Sisεmεti bεε bεε bε bεn ɲɔgɔn ma

Lamaga-lamagali min bɛ ɲɔgɔn falen-falen, o bɛ a latigɛ:

• Angle de crosshatch (kɛrɛnkɛrɛnnenya la).
• Surface pattern (yɔrɔ) cogoya
• Masiniw ka ɲɔgɔndɛmɛ

Sitimɛ kɔrɔw bɛ se ka tɔɔrɔ ni ninnu ye:

• Lamaga-lamagali min tɛ kelen ye
• Jyɔrɔ filiw
• Masinaw ka sɛgɛn

Liruite retrofit bεε bε bεn:

• Servo motɛri
• Rail guide lineaire ye
• Nizɛri jɔyɔrɔ kɔlɔsili

Paramɛtiri minnu bɛ kɛ cogoya la:

5. Nɛnɛ ni filɛri siratigɛ ɲɛnabɔli

Honing quality bɛ bɔ kosɛbɛ nɛnɛfɛnw saniya la.

Sitimɛ kɔrɔw bɛ se ka kɛ ni:

• Filɛli kɛcogo jugu
• Tumu nɔgɔli
• Funteni hakɛ jiginni

Liruite ka bεnkanw:

• Filɛri min bɛ kɛ ni magnɛti ye
• Filɛtiri caman-taama
• Tumu laminicogo

Labɛncogo min bɛ kɛ cogoya la:

Nafaw:

• Masina lamini saniyalen don
• Surface jogo ɲɛnabɔlen
• Honing baarakɛminɛn ɲɛnamaya janya

Liruite ka kɔsegin kɛcogo

Taabolo fɔlɔ : Minɛnw jateminɛni

Sani u ka retrofit kɛ, Liruite injiniyɛriw bɛ sɛgɛsɛgɛli kɛ:

Masina cogoya:

• Masina dilan
• Spindle (sɔgɔsɔgɔninjɛ) jɔcogo
• Guide rails (siraw ɲɛminɛbagaw).
• Fixture system (sɛnɛfɛnw sigicogo).

Kuran cogoya:

• Kontrɔli kabini
• Motɛriw
• Sensɔrɔlanw
• Wiring (wiring) ye

Baarakɛcogo wajibiyalen:

• Baarakɛminɛn minnu bɛ yen sisan
• Tiɲɛni wajibiyalen don
• Siniɲɛsigi sɛnɛfɛnw ɲinini

Taabolo 2nan: Retrofit Design

Ka da jateminɛ jaabiw kan, Liruite bɛ nin labɛn:

Masinaw ka ɲɛtaa bolodacogo

I n'a fɔ:

• Fɛnɲɛnɛmafagalanw ka ɲɛtaa
• Fixture (fiɲɛbɔlanw) caman cili
• Jateblaw sabatili

Kuranko yiriwali bolodalen

I n'a fɔ:

• CNC ka sigida
• Servo bolifɛn
• Kontrɔli kabini

Taabolo yiriwali bolodalen

I n'a fɔ:

• Honing paramètre optimisation (kalan kɛcogo ɲuman) ye
• Baarakɛminɛnw sugandili
• Sɛnɛfɛnw dilanni sɛgɛsɛgɛli

3nan : Fɛnɲɛnɛmafagalanw cili

Yɔrɔ kunbaba minnu jiginna:

CNC Sistɛmu ye

Liruite ye a yɛrɛ di honing control system

Servo Kɔnɔnafiliw

• Balo servo
• Servo min bɛ ɲɔgɔn falen-falen

Kuranko yɔrɔw

Schneider ka kuran yɔrɔw

Précision Components (Dɔgɔtɔrɔsow) minnu bɛ Kɛ

• Bearings (Bɛriw) minnu bɛ yen
• Couples (ɲɔgɔndɛmɛ) minnu bɛ kɛ
• Sensɔrɔlanw

Liruite CNC honing masin kura bɛ baara kɛ ni diɲɛ tɔnba kuran yɔrɔw ye ani fɛnw ye minnu bɛ kɛ ka ɲɛ walasa ka dannaya sɔrɔ waati jan kɔnɔ.

Taabolo 4nan : Jateminɛ ni sɛgɛsɛgɛli

Retrofit kɔfɛ:

Liruite bɛ ɲɛnajɛ kɛ:

Jateminɛ ka jateminɛ

Waritasɛbɛn:

• Spindle (sɔgɔsɔgɔninjɛ) ɲɔgɔndan
• AVC tiɲɛni
• Fixture (fiɲɛbɔlanw) jɔyɔrɔfalen

Baarakɛcogo Kɔrɔbɔli

Kɔrɔbɔli:

• Bore diamètre (Bore diamètre) ye
• Laminiko
• Surface roughness (yɔrɔ min ka gɛlɛn).

Sɛnɛfɛnw dilanni Sɛgɛsɛgɛli

Sɛmɛntiya:

• Basigi sabatili
• Segin-ka-bɔnye kɛli
• Operatɛri ka baarakɛcogo

Honing Machines minnu bɛnnen don ka kɛ Retrofit ye

Silindri hydraulique Honing Machine Retrofit

Baarakɛcogo:

• Silindri jilama iziniw
• Ɛntɛrinɛti masinw feerelaw

Yɛlɛma laɲiniw:

• Bonya kɔlɔsili ka fisa
• Sɛnɛfɛnw dilanni nafa ka bon

Masina seko danma sɛgɛsɛgɛli kɔfɛ:

Moteur Honing Machine Retrofit (Masina min bɛ affichage moteur) la

Baarakɛcogo:

• Dizili motɛri iziniw
• Mobili motɛri dilanyɔrɔw

Yɛlɛmaba sinsinnan:

• Surface quality (yɔrɔ) cogoya
• Taabolo segin-segincogo
• Kontrɔli otomatiki

Dingɛ jugumanba Honing Machine Retrofit

Baarakɛcogo:

• Tubabu jibolisira janw
• Industrial dingɛ juguw

Seko min bɛ kɛ cogoya la:

Masina de honing bore belebele Retrofit

Baarakɛcogo:

• Minɛriw ka silindaw
• Ji-yɔrɔ-ko-minɛnw
• Industriw ka yɔrɔ girinmanw

Yɛlɛma min bɛ se ka kɛ:

• Baarakɛminɛn minnu ka bon
• Fixture barikama ka bon
• Balofɛnw kɔlɔsili ɲɛnabɔli ka ɲɛ

Liruite bore honing solutions belebelew bɛ dɛmɛ don baarakɛcogo la min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye fo ka se Φ1600mm ma ka kɛɲɛ ni minɛnw cogoya ye.

Nafa minnu bɛ Liruite Honing Machine Retrofit Solution la

Ka dɔ bɔ Investissement musakaw la

Ni i y’a suma ni masin kura sanni ye:

Retrofit bɛ se ka dɔ bɔ:

• Minɛnw ka wari bilali
• A sigili waati
• Operatɛri ka kalan musaka

Minɛnw ka ɲɛnamaya waati janya

Ni kɔsegin kɛra ka ɲɛ, o bɛ se ka minɛn kɔrɔw nafa janya ni:

• Kunnafoni-falen-falen sira
• Servo sitɛmu
• Kuranko yɔrɔw

Masinaw ka tiɲɛni kɛcogo ɲɛ

Retrofit kɔfɛ:

Dilanbagaw bɛ se ka ninnu sɔrɔ:

• Dimensions sabatilenw ka ca
• Surface finish ka fisa
• Banni hakɛ dɔgɔyara

Ka Sɛnɛfɛnw dilanni ɲɛnabɔli ɲɛ

Nizɛri kunnafoni bɛ nin di:

• Paramɛtiriw marali
• Taabolo kɔlɔsili
• Hakilila sɛgɛsɛgɛli

Mun na an bɛ Liruite Retrofit Solution sugandi?

1. Honing Machine dilanni dɔnniya

Liruite ka baara kɛlenw ka ca ni san 15 ye masinw ɲinini ni u dilanni na.

• Sosiyete in sinsinnen bɛ ninnu kan:
• CNC horizontal honing masinw
• Dingɛ jugumanw sɔgɔli minɛnw
• Silindri jimafɛnw sɔgɔli furaw

2. Segin-ka-bɔnye min sinsinnen bɛ Teknoloji fɔlɔ kan

Liruite tɛ i n’a fɔ masinw dilanko tɔnba caman, a b’a faamu ko:

• Honing (honing) taabolo
• Baarakɛminɛnw kɛcogo ɲɛnabɔli
• Surface (yɔrɔ) jɔcogo

Retrofit dilancogo sinsinnen bɛ honing machine yiriwali dɔnniya yɛrɛ kan.

3. Ɲɛnabɔli ɲɛnabɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Masina minnu bɛ yen, olu bɛɛ cogoya tɛ kelen ye.

Liruite bɛ nin di:

• Retrofit yɔrɔ dɔ
• CNC sɛnɛcogo dafalen
• Taabolo ɲɛtaa
• Sɛnɛfɛnw dilanni siraw jɛ-ka-baara

4. Baarakɛlaw ka dɛmɛni fɛɛrɛbɔ

Dɛmɛn dɔw ye ninnu ye:

• Minɛnw jateminɛni
• Retrofit dilancogo
• Installation (dadon) kɛli
• Debugging (ɲɛnabɔli) kɛli
• Operatɛriw ka kalan

Ɲininkaliw

Liruite Honing Machine Retrofit Solution ye

Dilanbagaw fɛ minnu bɛ baara kɛ ni fɛn dilanni minɛn kɔrɔw ye, a ka c’a la, fɛnw sɛgɛsɛgɛli ye fɛɛrɛ ɲuman ye walasa ka fɛn dilanni seko ɲɛ k’a sɔrɔ u ma masin bɛɛ bila a nɔ na.

Liruite bɛ honing machine manufacturing dɔnniya, CNC control technology ani precision machining dɔnniya fara ɲɔgɔn kan walasa ka retrofit solutions di hydraulique silinda dilannikɛlaw ma, motɛri dilannikɛlaw, aerospace feerelaw ani izini girinmanw.

K’a ta kunnafonidilanw cili la ka se masinw kurayali dafalen ma, Liruite bɛ porozɛ kelen-kelen bɛɛ jateminɛ ka kɛɲɛ ni kiliyan ka minɛnw cogoya n’u ka masinw ɲinini ye, ka iziniw dɛmɛ u ka se ka tiɲɛni kɛcogo ɲuman sɔrɔ, ka baarakɛcogo ɲuman sɔrɔ ani ka baara kɛcogo ɲuman sɔrɔ.